Air Control India
GIDC Makarpura, Vadodara, Gujarat
GST No. 24AZPPB7338G1ZB
TrustSEAL Verified
Call 0804606215773% Response Rate
SEND EMAIL
Product Details:
| Valve size | 2.0 inch |
| Material | Brass |
| Automation Grade | Automatic |
| Media | Air |
| End Connection Type | Threaded |
| Features | Durable |
| Wattage | 9 W |
| Voltage | 230 V |
| Connection Type | Flange End |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm22" Semi Lift Diaphragm Operated Solenoid Valve |
Product Details:
| Valve Size | 3.0 inch |
| Pressure | Medium Pressure |
| Usage/Application | Water |
| Material | Brass |
| Control | Pilot Operated |
| Coil Voltage | 24V |
| Connection Type | Screwed |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10?? C to 70?? C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Valve Size | 3/8 inch |
| Material | SS |
| Usage/Application | Industrial |
| Connection Type | Flanges |
| Color | Silver |
| Operating Voltage | 220 V |
| Power Consumption | 11 W |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Valve Size | 1.0 inch |
| Usage/Application | Air |
| Material | Stainless Steel |
| Pressure | Medium Pressure |
| Voltage | 230 V |
| Connection Type | Screwed / Flange End |
| Material Grade | SS304 |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Pressure | 7 Bar |
| Usage/Application | Industrial |
| Media | Water |
| Automation Grade | Automatic |
| Material | Stainless Steel |
| Coil Voltage | 24V |
| Valve Sizes | 3/4" NPT |
| Country of Origin | Made in India |
Refer below technical data sheet (Available BSP / NPT)
End Connection:Screwed / Flange
Body Material:SS ASTM A351 Grade CF8 / CF8M, Forged Brass
Media Temp & seal o ring:-30° C to 90° C, -10° C to 140° C, -10° C to 180° C , -10° C to 180° C
Diapharagm:Nitrile (NBR), EPDM, Viton (FKM), PTFE
Circumstance Temp:-10° C to 70° C
Media:Air, Water, Chemical, Gas, Oil, Steam, LPG.
Main Features:Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment.
Operating Voltage & Power Consumption:24AC, 110AC, 230AC, 12DC, 24DC
Power Consumption:7W, 8W, 8W / 17W, 10W, 11W
Optional Feature:90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application.
Other Specification Data:Available on Request.
Coil InformationCoil Features:High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Coil Housing:Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure.
Product Details:
| Valve Size | 3/4 inch |
| Material | SS |
| Connection Type | Screwed and Flange End |
| Media Type | Gas |
| Material Grade | SS304 |
| Color | Silver |
| Coil Voltage | 24 V |
| Power Consumption | 11 W |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Valve Size | 4 inch |
| Pressure | 12 bar |
| Control Type | Solenoid Coil |
| Material | SS |
| Color | Silver |
| Material Grade | SS316 |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Air,Water,Chemical,Gas. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
| Other Specification Data: | Available on Request - High Pressure 20Kg Series. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Note: | Use of filter in the inlet port is recommended. |
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
|---|---|---|---|---|---|---|---|
| PCN28 | CF8 / CF8M | ½” | 17 | 0.5 | 12 | NBR / EPDM / VITON | 03.20 |
| PCN38 | CF8 / CF8M | ¾” | 20 | 0.5 | 12 | NBR / EPDM / VITON | 5 |
| PCN48 | CF8 / CF8M | 1” | 25 | 0.5 | 12 | NBR / EPDM / VITON | 8.20 |
| PCN58 | CF8 / CF8M | 1¼” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 12.20 |
| PCN68 | CF8 / CF8M | 1½” | 36 | 0.5 | 12 | NBR / EPDM / VITON | 17.10 |
| PCN88 | CF8 / CF8M | 2” | 48 | 0.5 | 12 | NBR / EPDM / VITON | 29.90 |
| PCN98 | CF8 / CF8M | 2½” | 60 | 0.5 | 12 | NBR / EPDM / VITON | 43.50 |
| PCNA8 | CF8 / CF8M | 3” | 72 | 0.5 | 12 | NBR / EPDM / VITON | 64.50 |
Product Details:
| Valve Size | 1/2 inch |
| Media | Water |
| Material | Brass |
| Flow Factor | 17.10 |
| Coil Voltage | 24V |
| Control | Pilot Operated |
| Packaging Type | Box |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
| Other Specification Data: | Available on Request |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure |
| Note: | Use of filter in the inlet port is recommended. |
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
|---|---|---|---|---|---|---|---|
| PBN260 | Brass | ½" | 12 | 0.30 | 10 | NBR / EPDM / VITON | 2.10 |
| PBN360 | Brass | ¾" | 20 | 0.30 | 10 | NBR / EPDM / VITON | 5.50 |
| PBN460 | Brass | 1" | 25 | 0.30 | 10 | NBR / EPDM / VITON | 9 |
| PBN660 | Brass | 1½" | 36 | 0.30 | 10 | NBR / EPDM / VITON | 17.10 |
Product Details:
| Valve Size | 1/2 inch |
| Media | Gas |
| Material | Brass |
| Flow Factor | 17.10 |
| Coil Voltage | 24V |
| Port Type | BSP |
| Frequency | 50 Hz |
| Wattage | 6 W |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10?? C to 70?? C | ||||||||||
| Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
| Other Specification Data: | Available on Request |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure |
| Note: | Use of filter in the inlet port is recommended. |
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm?? | Max. Operating Pressure Kg/cm?? | Seal & Diaphragm Material | Flow Factor Kv m?? / hr |
|---|---|---|---|---|---|---|---|
| PBN260 | Brass | ??" | 12 | 0.30 | 10 | NBR / EPDM / VITON | 2.10 |
| PBN360 | Brass | ??" | 20 | 0.30 | 10 | NBR / EPDM / VITON | 5.50 |
| PBN460 | Brass | 1" | 25 | 0.30 | 10 | NBR / EPDM / VITON | 9 |
| PBN660 | Brass | 1??" | 36 | 0.30 | 10 | NBR / EPDM / VITON | 17.10 |
Product Details:
| Valve Size | 1/2 inch |
| Media | Water |
| Material | Brass |
| Temperature Of Media | Medium Temperature |
| Flow Factor | 2.10 |
| Coil Voltage | 24V |
| Control | Pilot Operated |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10?? C to 70?? C | ||||||||||
| Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
| Other Specification Data: | Available on Request |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure |
| Note: | Use of filter in the inlet port is recommended. |
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm?? | Max. Operating Pressure Kg/cm?? | Seal & Diaphragm Material | Flow Factor Kv m?? / hr |
|---|---|---|---|---|---|---|---|
| PBN260 | Brass | ??" | 12 | 0.30 | 10 | NBR / EPDM / VITON | 2.10 |
| PBN360 | Brass | ??" | 20 | 0.30 | 10 | NBR / EPDM / VITON | 5.50 |
| PBN460 | Brass | 1" | 25 | 0.30 | 10 | NBR / EPDM / VITON | 9 |
| PBN660 | Brass | 1??" | 36 | 0.30 | 10 | NBR / EPDM / VITON | 17.10 |
Product Details:
| Usage/Application | Air |
| Material | Stainless Steel |
| Voltage | 230 V |
| Valve Sizes | 3/8 inch |
| Connection Type | Screwed / Flange End |
| Material Grade | SS316 |
| Power Consumption | 9 W |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10?? C to 70?? C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Valve Size | 3/8 inch |
| Media | Gas |
| Material | SS |
| Temperature Of Media | Medium Temperature |
| Coil Voltage | 24V |
| Control | Pilot Operated |
| Automation Grade | Automatic |
| Connection Type | Screwed / Flange End |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10?? C to 70?? C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Product Details:
| Pressure | Medium Pressure |
| Usage/Application | Air |
| Material | Stainless Steel |
| Voltage | 230 V |
| Valve Sizes | 3/8" |
| Connection Type | Screwed |
| Material Grade | SS-304 |
| Country of Origin | Made in India |
| Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Connection: | Screwed / Flange | ||||||||||
| Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
| Diaphragm & Media Temp: |
|
||||||||||
| Circumstance Temp: | -10° C to 70° C | ||||||||||
| Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
| Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
| Operating Voltage & Power Consumption: |
|
||||||||||
| Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
| Other Specification Data: | Available on Request. |
| Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
|---|---|
| Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
| Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
| Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |